| Model | Material | SCFM | FPT inlet | MPT outlet |
| P5050-ST | Brass | 20 | 1/2” | 1/2” |
| S1212 | Steel | 20 | 1/2” | 1/2” |
| P5075-ST | Brass | 30 | 1/2” | 3/4” |
| P7575-ST | Brass | 30 | 3/4” | 3/4” |
| S3434 | Steel | 30 | 3/4” | 3/4” |
| P7510-ST | Brass | 60 | 3/4” | 1” |
| S1034 | Steel | 60 | 3/4” | 1” |
| P7515-ST | Brass | 150 | 3/4” | 1 1/2” |
| P1010-ST | Brass | 60 | 1” | 1” |
| S1010 | Steel | 60 | 1” | 1” |
| P1212-ST | Brass | 130 | 1 1/4” | 1 1/4” |
| P1515-ST | Brass | 150 | 1 1/2” | 1 1/2” |
Intank Check Valve – NPT Threads (Control Devices)
Please see below for product description and specs.
Description
Additional information
| Model | P5050-ST, S1212, P5075-ST, P7575-ST, S3434, P7510-ST, S1034, P7515-ST, P1010-ST, S1010, P1212-ST, P1515-ST |
|---|---|
| Manufacturer | Control Devices |
Related products
Cold Start Valve (Control Devices)
CS -12 and CS -25 valves bleed air from the compressor head during the first few revolutions, thus reducing motor
Vacuum Relief Valve (Control Devices)
Model VR vacuum relief valves are used in systems to maintain a desired vacuum level. Model VR is a proportional
1/4” – 3/8” ASME Safety Relief Valves (Control Devices)
Select model and pressure setting below.
Low Pressure Relief Valve (PR-25) (Control Devices)
Model PR low pressure relief valves are used in systems to maintain a desired pressure level. Model PR is a
High Capacity ASME Side Port Relief Valves (Control Devices)
Select model and pressure setting below.
Tank Valve (Control Devices)
Tank valves are used wherever a method of inflating a tank with a standard air chuck is required. Brass body,
LGM 30 Load Genie – Continuous Run Unloader (Control Devices)
The Load Genie Mark LGM 30 replaces the conventional three component system with all the economic advantages including elimination of
Non Code Relief Valve (Control Devices)
This safety valve though miniature in size has been designed to give high flow performance. NC valves incorporate many of