Ball Check Valve - Stainless Steel - Image 1
Click to enlarge
Ball Check Valve - Brass
Ball Check Valve - Brass
Back to products
Tank Manifolds (Control Devices)
Tank Manifolds (Control Devices)

Ball Check Valve – Stainless Steel

Please see below for product description and specs.
Category:
Description
  • 400 psi maximum size ¼” to 2”
  • 175 psi maximum 2 ½” to 3”
  • 210° F maximum temperature
  • 0.5 psi cracking pressure
Model Size
SC-2 1/4”
SC-3 3/8”
SC-4 1/2”
Additional information
Model

SC-2

,

SC-3

,

SC-4

Related products

Ball Check Valve – Brass

400 psi maximum size ¼” to 2” 210° F maximum temperature 0.5 psi cracking pressure Model Size BC-2 1/4” BC-3

Cast Brass Check Valve (Control Devices)

250 psi maximum 450° F maximum temperature Cracking Pressure < 3 psi Model Size CB-13 1/8” CB-25 1/4” CB-38 3/8”

Check Valve – Female – Female 2000 psi maximum

2000 psi maximum -20° F to 212° F Brass Model Size BC 125B 1/8” BC 250B 1/4”

Check Valve – Male-Male (Control Devices)

250 psi maximum 40° F to 250° F Brass Model Size M2525 1/4”

Inline Check Valve (Control Devices)

IC valve can be installed in the discharge line of the compressor whenever an in-tank valve will not fit, and

Intank Check Valve – Compression Fitting (Control Devices)

Model Material SCFM Tube Comp MPT outlet C5050-ST Brass 20 1/2” 1/2” SC1212 Steel 20 1/2” 1/2” C7575-ST Brass 30

Swing Check Valve

Bronze Construction Operating Temp. 200° F Max. Pressure 150 psi Full flow and can be installed vertically or horizontally Recommended

Load Genie – Unloader Check Valve (Control Devices)

Combination Unloader and Check Valve. Unloads compressor manifold any time flow stops. Model Inlet Outlet SCFM PA-12 3/8” FPT 3/8”