High flow rate safety valve.
- Brass construction
- Resilient Silicone rubber seat
- Bubble tight to within 10% of set pressure.
- Maximum temperature 250˚F
| Model | Size | Settings |
| SB-75 | 3/4” | 70 to 225 psi |
| SW-10 | 1” | 100 to 200 psi |
| SW-12 | 1 1/4” | 100 to 300 psi |
3/4” – 1” – 1 ¼” ASME Safety Relief Valves (Control Devices)
Select model and pressure setting below.
Please see below for product description and specs.
Description
Additional information
| Model | SB-75, SW-10, SW-12 |
|---|---|
| PSI | 55, 70, 75, 85, 90, 95, 100, 110, 115, 120, 125, 130, 135, 140, 150, 155, 160, 165, 175, 190, 195, 200, 205, 210, 215, 225, 265, 275, 300 |
| Manufacturer | Control Devices |
Related products
Tank Valve (Control Devices)
Tank valves are used wherever a method of inflating a tank with a standard air chuck is required. Brass body,
Cast Brass Check Valve (Control Devices)
250 psi maximum 450° F maximum temperature Cracking Pressure < 3 psi Model Size CB-13 1/8” CB-25 1/4” CB-38 3/8”
Inline Check Valve (Control Devices)
IC valve can be installed in the discharge line of the compressor whenever an in-tank valve will not fit, and
LGM 30 Load Genie – Continuous Run Unloader (Control Devices)
The Load Genie Mark LGM 30 replaces the conventional three component system with all the economic advantages including elimination of
Throttle Control (Control Devices)
TC throttle controls are used on gas engine-driven compressors to reduce engine speed to idle when the continuous run control
Intank Check Valve – Compression Fitting (Control Devices)
Model Material SCFM Tube Comp MPT outlet C5038-STA Brass 20 1/2” 3/8” C5050-ST Brass 20 1/2” 1/2” SC1212 Steel 20
P25 Unloader Pilot Valve (Control Devices)
Variable Range and Differential This Unloader Pilot Valve fills the need for a control that can be adjusted both for
Load Genie – Unloader Check Valve (Control Devices)
Combination Unloader and Check Valve. Unloads compressor manifold any time flow stops. Model Inlet Outlet SCFM CA-6 3/8” tube conn.